NVT utp hub NV-716J-PVD | passive hub NV-716J-PVD NVTVancouver Security Systems

VVS Phone 877-945-0550   Vancouver Security Systems
Vancouver Security SystemsVancouver Security CamerasVancouver Security SystemsVancouver Security CamerasVancouver Security SystemsRepairs
 

NVT utp hub NV-716J-PVD

16 Channel Cable Passive Integrator Hub


NVT utp hub NV-716J-PVD

Product SKU: NV-716J-PVD

Spec Sheet
Spec Sheet

Typically installed in the wiring closet or IDF room, the NV-716J-PVD is a passive “pass-through” wiring device that efficiently consolidates camera power, video, and pan/tilt/zoom telemetry data onto a minimum of 4-pair RJ45 cables.

Power, video and data are converted at the camera using a PVD™ transceiver which utilizes a single 4-pair cable with RJ45 connectors to deliver each camera‘s signals to the NV-716J-PVD. Up to sixteen cameras are supported. The NV-716J-PVD receives low-voltage camera power from any third-party multi-output Class 2 power supply. Control Room connections are achieved with a single 4-pair RJ45 cable for each group of four cameras. P/T/Z telemetry data, if required, passes through another 4-pair RJ45 cable. Control Room connections may be made using any multi-channel NVT receiver or hub. All equipment employs industry-standard EIA/TIA 568B pinouts.


To order this item, please call 877-945-0550, fax 604-944-8894 or request a quote via the Request a Quote button below.

Vancouver Security Systems

 

     
NVT utp hub NV-716J-PVD

Typically installed in the wiring closet or IDF room, the NV-716J-PVD is a passive “pass-through” wiring device that efficiently consolidates camera power, video, and pan/tilt/zoom telemetry data onto a minimum of 4-pair RJ45 cables.

Power, video and data are converted at the camera using a PVD™ transceiver which utilizes a single 4-pair cable with RJ45 connectors to deliver each camera‘s signals to the NV-716J-PVD. Up to sixteen cameras are supported. The NV-716J-PVD receives low-voltage camera power from any third-party multi-output Class 2 power supply. Control Room connections are achieved with a single 4-pair RJ45 cable for each group of four cameras. P/T/Z telemetry data, if required, passes through another 4-pair RJ45 cable. Control Room connections may be made using any multi-channel NVT receiver or hub. All equipment employs industry-standard EIA/TIA 568B pinouts.

Product ID: 1125